歷經10年的行業積累，威能檢驗已為全球多個國家的客戶提供優質的檢驗服務.
| API Spec 5CRA | Specification for Corrosion-resistant Alloy Seamless Tubes for Use as Casing, Tubing, and Coupling Stock |
| API RP 5SI | Recommended Practice for Purchaser Representative Surveillance and/or Inspection at the Supplier |
| API RP 2SIM | Structural Integrity Management of Fixed Offshore Structures |
| API TR 941 | The Technical Basis Document for API RP 941 |
| API Std 6ACRA | Nickel Base Alloy 718 (UNS N07718) for Oil and Gas Drilling and Production Equipment Second Edition [Superseded: API SPEC 6A718, API SPEC 6A718] |
| API Std 682 | Pumps—Shaft Sealing Systems for Centrifugal and Rotary Pumps |
| API Std 681 | Liquid Ring Vacuum Pumps and Compressors for Petroleum, Chemical, and Gas Industry Services |
| ASTM B21 | Standard Specification for Naval Brass Rod, Bar, and Shapes |
| ASTM B171 | Standard Specification for Copper-Alloy Plate and Sheet for Pressure Vessels, Condensers, and Heat Exchangers |
| ASTM C892 | Standard Specification for High-Temperature Fiber Blanket Thermal Insulation |
| ASTM C1498 | Standard Test Method for Hygroscopic Sorption Isotherms of Building Materials |
| ASTM C552 | Standard Specification for Cellular Glass Thermal Insulation |
| ASTM C351 | Standard Test Method for Mean Specific Heat of Thermal Insulation |
| ASTM C518 | Standard Test Method for Steady-State Thermal Transmission Properties by Means of the Heat Flow Meter Apparatus |
| ASME Y14.6 | Screw Thread Representation螺紋表示法 |
| ASME PTC 10 | Compressors and Exhausters壓縮機和排氣機 |
| ASME BPVC XII | 2017 ASME Boiler and Pressure Vessel Code, Section XII: Rules for Construction and Continued Service of Transport Tanks 運輸罐建造和延續使用規則 |
| ASME BPVC IX | ASME Boiler and Pressure Vessel Code, Section IX: Welding and Brazing Qualifications 焊接和釬焊評定標準 |
| ASME BPVC VIII-3 | ASME Boiler and Pressure Vessel Code (BPVC), Section VIII, Division 3: Alternative Rules for Construction of High Pressure Vessels ASME 第VIII卷第三冊 高壓容器建造規則 |
| ASME BPVC VIII-2 | ASME Boiler and Pressure Vessel Code, Section VIII, Division 2: Alternative Rules ASME第VIII卷第二冊 壓力容器建造另一規則 |
| ASME BPVC VIII-1 | ASME Boiler and Pressure Vessel Code, Section VIII, Division 1: Rules for Construction of Pressure Vessels ASME第VIII卷第一冊 壓力容器建造規則 |
| NACE SP0490 (formerly RP0490) | Holiday Detection of Fusion-Bonded Epoxy External Pipeline Coating of 250 to 760 μm (10 to 30 mil) |
| NACE SP0394 (formerly RP0394) | Application, Performance, and Quality Control of Plant-Applied, Fusion-Bonded Epoxy External Pipe Coating |
| NACE TM0284 | Standard Test Method - Evaluation of Pipeline and Pressure Vessel Steels for Resistance to Hydrogen-Induced Cracking 管道、壓力容器抗氫致開裂鋼性能評價的試驗方法 |
| NACE TM0177 | Laboratory Testing of Metals for Resistance to Sulfide Stress Cracking and Stress Corrosion Cracking in H2S Environments H2S環境中抗特殊形式的環境開裂材料的實驗室試驗方法 |
| NACE MR0176 | Metallic Materials for Sucker-Rod Pumps for Corrosive Oilfield Environments |
| NACE MR0175/ISO 15156 | Petroleum and natural gas industries —Materials for use in H2S-containing environments in oil and gas production |
| ISO 9906 | Rotodynamic pumps — Hydraulic performance acceptance tests — Grades 1, 2 and 3 |
| ISO 8503-4 | Preparation of steel substrates before application of paints and related products -- Surface roughness characteristics of blast-cleaned steel substrates -- Part 4: Method for the calibration of ISO surface profile comparators and for the determination of |
| ISO 8503-2 | Preparation of steel substrates before application of paints and related products — Surface roughness characteristics of blast-cleaned steel substrates —Part 2:Method for the grading of surface profile of abrasive blast-cleaned steel —Comparator procedure |
| ISO 8503-1 | Preparation of steel substrates before application of paints and related products -- Surface roughness characteristics of blast-cleaned steel substrates -- Part 1: Specifications and definitions for ISO surface profile comparators for the assessment of ab |
| ISO 8502-3 | Preparation of steel Substrates before application of paint and related products - Tests for the assessment of surface cleanliness - Part 3: Assessment of dust on steel surfaces prepared for painting (pressure-sensitive tape met |
| ISO 8501-4 | Preparation of steel substrates before application of paints and related products -- Visual assessment of surface cleanliness -- Part 4: Initial surface conditions, preparation grades and flash rust grades in connection with high-pressure water jetting |
| ISO 8501-3 | Preparation of steel substrates before application of paints and related products — Visual assessment of surface cleanliness — Part 3: Preparation grades of welds, edges and other areas with surface imperfections |
| GB5908-2005 | 石油儲罐阻火器 |
| GB/T9112 | 鋼制管法蘭 類型與參數 |
| GB/T9109.2 | 石油和液體石油產品動態計量 第2部分：流量計安裝技術要求 |
| GB/T4980 | 容積式壓縮機噪聲的測定 |
| GB/T11352 | 一般工程用鑄造碳鋼件 |
| GB/T 985.2 | 埋弧焊的推薦坡口 |
| GB/T 985.1 | 氣焊、焊條電弧焊、氣體保護焊和高能束焊的推薦坡口 |
| JB/T8473 | 儀表閥組 |
| JB/T 10563 | 一般用途離心通風機技術條件 |
| JB/T 9244 | 玻璃板液位計 |
| JB/T 9218 | 滲透探傷方法 |
| JB/T 9092 | 閥門的檢驗與試驗 |
| JB/T 9078.2 | 天然氣分離設備 性能試驗方法 |
| JB/T 9078.1 | 天然氣分離設備 技術條件 |
| SY/T 10042 | 海上生產平臺管道系統設計和安裝的推薦作法 |
| SY/T 10041 | 石油設施電氣設備安裝一級一類和二類區域劃分 |
| SY/T 10037 | 海底管道系統 |
| SY/T 10031 | 寒冷條件下結構和海管規劃、設計和建造的推薦作法 |
| SY/T 10030 | 海上固定平臺規劃.設計和建造的推薦作法.工作應力設計法 |
| SY/T 10025 | 海洋鉆井裝置作業前檢驗規范 |
| SY/T 10024 | 井下安全閥系統的設計、安裝、修理和操作的推薦作法 |
| NB/T 47039 | 可變彈簧支吊架 |
| NB/T 47038 | 恒力彈簧支吊架 |
| NB/T 47034 | 工業鍋爐技術條件 |
| NB/T 47019.1 | 鍋爐、熱交換器用管訂貨技術條件_第1部分：通則 |
| NB/T 47018.7 | 承壓設備用焊接材料訂貨技術條件 第7部分：鈦及鈦合金焊絲和填充絲 |
| NB/T 47018.6 | 承壓設備用焊接材料訂貨技術條件 第6部分：鋁及鋁合金焊絲和填充絲 |
| NB/T 47018.5 | 承壓設備用焊接材料訂貨技術條件 第5部分：堆焊用不銹鋼焊帶和焊劑 |
掃描二維碼
關注微信公眾號
